2-channel analog output terminal -10…+10 mA EL4112-0010
Run LED 2
Run LED 1 
Power contact
+24 V
Power contact 0 V
+Output 1
+Output 2
+24 V
0 V
extended shock and vibration range 25g

EL4112-0010 | 2-channel analog output terminal -10…+10 mA

The EL4112-0010 analog output terminal generates analog output signals in the range between -10 and +10 mA. The power is supplied to the process level with a resolution of 16 bits and is electrically isolated. Ground potential for the output channels of an EtherCAT Terminal is common with the 24 V DC supply. The output stages are powered by the 24 V supply. The signal state of the EtherCAT Terminals is indicated by light emitting diodes.

Technical data EL4112-0010
Connection technology 3-wire, single-ended
Number of outputs 2
Power supply 24 V DC via power contacts
Signal current -10…+10 mA
Distributed clocks yes
Distributed clock precision << 1 µs
Load < 500 Ω (short-circuit proof)
Measuring error < ±0.1 %
Output error < 0.1 % (relative to end value)
Resolution 16 bit (incl. sign)
Electrical isolation 500 V (E-bus/signal voltage)
Conversion time ~ 40 µs
Current consumption power contacts typ. 15 mA + load
Current consumption E-bus typ. 160 mA
Bit width in the process image 2 x 16 bit AO output
Configuration no address or configuration setting
Special features Watchdog parameterisable, user synchronisation can be activated
Weight approx. 65 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals/markings CE, UL, ATEX
Ex-Marking II 3 G Ex nA IIC T4 Gc
Related products  
EL4112 2-channel analog output terminal 0…20 mA, 16 bit