AMP80xx
 
AMP80xx Distributed Servo Drive

AMP80xx | Distributed Servo Drive

The AMP8000 can be installed in place of a standard AM8000 or AM8500 servomotor. There is no need to modify existing machine design, since only the overall length has been changed, i.e. the other dimensions remain unchanged. Through the use of the latest output stage technologies, there is minimal derating, i.e. the performance data is almost on a par with the comparable standard motor type.

The AMP8000 is available with flange sizes F4 (2.01...4.80 Nm) and F5 (4.08...9.70 Nm). It can be equipped with either multi-turn or single-turn encoders. TwinSAFE (STO/SS1) is integrated as standard; Safe Motion will be available as an option.

Technical data
Motor type permanent magnet-excited three-phase synchronous motor with integrated servo drive
Magnet material neodymium-iron-boron
Insulation class thermal class F (155 °C)
Design form flange-mounted according to IM B5, IM V1, IM V3
Protection class IP 54, IP 65 (shaft seal)
Cooling convection, permissible ambient temperature 40 °C
Coating/surface dark grey powder coating, similar to RAL7016
Temperature sensor integrated in stator winding
Connection method round plug connector, swivelling, angled
Approvals CE, UL in preparation
Feedback system absolute encoder single-turn and multi-turn (OCT)
Options AMP80xx
Feather key groove according to DIN 6885 P1
Holding brake backlash-free permanent magnet single-surface brake, suitable only as holding brake
Shaft seal radial shaft seal made of FPM
Feedback system option safe absolute encoder single- and multi-turn
TwinSAFE safe drive technology integrated TwinSAFE Logic, STO, SS1, SS2, SOS, SLS, SDIp, SDIn, SSM, SSR, SMS, SLP, SCA, SLI, SAR, SMA (in preparation)
Product announcement
estimated market release 3rd quarter 2019